Ceiling fans are a wonderful addition to your home. These fans are more energy-efficient and environmentally friendly than air conditioning.
Most ceiling fans have a light bulb socket that serves as lighting. Usually, they have two light bulbs, but some have more. It is a big misconception that you can use regular light bulbs in ceiling fans.
For this reason, most incandescent bulbs burn out quickly. Vibration, higher wattage, loose wires, poor installation, and high line voltage are other reasons for bulb failure.
Using Ordinary Bulbs
Standard light bulbs are not designed to withstand the vibrations of a constantly moving fan, so they often burn out much faster than other types of light bulbs.
The above statement is very true. After searching many forums, the most common cause of bulb failure is poor bulb selection. The filaments wiggle due to vibrations and usually break.
Fortunately for you, you can quickly remedy the situation by replacing the traditional bulbs with an option that is best suited for ceiling fans. LEDs are durable, long-lasting, and produce less heat.
An excellent choice is the sleek, stylish and affordable –Philips ceiling fan LED bulbs. These decorative LED bulbs are the equivalent of their 40-watt incandescent counterparts.
But consume only 3.3 watts, making them an exceptionally versatile and efficient option for all consumers. With a 15,000-hour average life span, these bulbs are durable and long-lasting.
If you have a ceiling fan that keeps blowing light bulbs, it can be the fan.
If the ceiling fan has a mechanical defect or is not mounted properly, this can cause a short circuit and increase the risk of the bulbs blowing out.
In most cases, the problem occurs because your ceiling fan was installed before 1992. Another reason is it is either too powerful or has a socket too small for modern light bulbs.
Ceiling fans are not all the same. Our home appliances are required to meet stricter energy standards today than in previous decades. However, older ceiling fans were manufactured without regard to energy efficiency.
In fact, many pre-1992 models of ceiling fans are no longer in use because they use about twice as much electricity as newer models.
Vibration From The Fan
Blown light bulbs are annoying. It’s particularly frustrating when they keep blowing out consistently—especially if you’ve recently installed a bulb. As mentioned above, vibration can destroy your light within hours.
Vibration is a common reason for short bulb life in fans. If the bulb isn’t fully screwed into the socket, it can loosen up from the vibrations of the fan blades moving back and forth.
Furthermore, an incandescent (traditional) lightbulb isn’t recommended for use in ceiling fans because of the constant movement.
Other Causes of Light Bulbs Blowing on Ceiling Fan
Electrical short
When a light bulb burns out in a ceiling fan, the most common problem has to do with the wattage of the bulb. If you put in a too powerful bulb, it can cause an electrical short. A good rule of thumb for ceiling fans is to never use bulbs that are more than 60 watts.
Loose Wires
Another common cause of broken bulbs in ceiling fans is grounding problems or loose wire connections. If your fan is not grounded or one of the wires is not connected properly, a short circuit will occur, causing the bulbs to burn out.
If you use compact fluorescent light (CFL) bulbs, sometimes you do not screw them into the sockets. You should always be careful when inserting CFL bulbs into your lamps, as they can easily be over-tightened and get stuck in place or blow out prematurely.
Close To The Ceiling
Heat is another factor for premature bulb failure. If your fan is too close to the ceiling, it will heat up faster and are likely to burn out a bulb.
You can fix this by pulling down on the pull chains or adjusting the speed. Many designers recommend modifying the fan blade by at least eight inches, but no more than ten inches away from the ceiling.
To Recap
There you have it all the reason your light bulbs in your ceiling fan are burning out quickly.
